Brief description
In an RF lab, the R&S FPL1000 family is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
Key facts
Frequency range 5 kHz to 26.5 GHz
SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz
DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz
Lightweight with small footprint
40 MHz analysis bandwidth (option)
Specifications:
|
Display |
|
21 cm LC TFT color display (10.1) |
|
Resolution |
|
1280 × 800 pixel (WXGA resolution) |
|
Pixel failure rate |
|
< 1 × 10–5 |
|
Data storage |
||
|
Internal |
standard |
solid-state drive (SSD), 32 Gbyte |
|
External |
|
supports USB 2.0 compatible memory |
|
Environmental conditions |
||
|
Temperature |
operating temperature range |
0 °C to +50 °C |
|
storage temperature range |
–20 °C to +70 °C |
|
|
Damp heat |
without condensation |
+40 °C at 85 % rel. humidity, in line with EN
60068-2-30 |
|
Mechanical resistance |
||
|
Vibration |
sinusoidal |
5 Hz to 55 Hz, |
|
random |
10 Hz to 300 Hz, |
|
|
Shock |
|
40 g shock spectrum, in line with MIL-STD-810E,
method no. 516.4, |
|
EMC |
|
in line with EMC Directive
2014/30/EU including |
|
Recommended calibration interval |
|
2 years |
|
Models |
Frequency range |
Phase noise |
DANL @ 1 GHz |
Max. analysis bandwidth |
Instrument type |
|
R&S®FPL1003 |
5 kHz - 3 GHz |
< –108 dBc (1 Hz) |
< –163 dBm/Hz |
40 MHz (FPL1-B40) |
Signal and spectrum analyzer |
|
R&S®FPL1007 |
5 kHz - 7.5 GHz |
< –108 dBc (1 Hz) |
< –163 dBm/Hz |
40 MHz (FPL1-B40) |
Signal and spectrum analyzer |
|
R&S®FPL1014 |
5 kHz - 14 GHz |
< –108 dBc (1 Hz) |
< -160 dBm/Hz Pre-amp on |
40 MHz (FPL1-B40, and FPL1-B11) |
Signal and spectrum analyzer |
|
R&S®FPL1026 |
5 kHz - 26.5 GHz |
< –108 dBc (1 Hz) |
<-160 dBm/Hz Pre-amp on |
40 MHz (FPL1-B40, and FPL1-B11) |
Signal and spectrum analyzer |
